Відео

I cant extrude the text, done exactly what you did and fusion tells me "cant finish the extrusion". You have an idea what the issue is?

that was driving me BANANAS!!! TY SIR!

fantastic video - thank you!

i needed my holes to be 45 degrees from perpendicular. I had to create one solid piece to represent the hole and create a 360 degree circular pattern from it. Then individually offset each body to create a full 360 degree loop of parts in the helix pattern and then i could create rectangular pattern to form the full helix all the way up the body of the tube. I could then select all, including the body i wanted to keep, make a selection set, then make a copy of the part i wanted to keep, before deleting the original body. That way i can use the selection set instead of highlighting over 300 bodies to remove when i come to combine components

How do you print just the infill

imposible hacer la extrucción al objeto para que queden las curvas de las bisagras minuto 11:11 YA LO SOLUCIONÉ

The moving and centring part was especially my problem for trying to position an imported svg sketch into a model to extrude probably. What I had to do previously is "manually" move it, which made me very frustrated cause it wasn't symmetrical the more you zoom and caused me a terrible OCD... but no more, I now know how to center by a point and I love you for all the tips you've shown. Thank you!

Hi! When I am extruding the pin, I get one combined body, instead of two seperate bodies like you get. Any idea why?

Fantastic!

This video is enough to convince me to get fusion 360!

Cool. Can I also do bevel gear?

that´s really not intuitive... thank you for explaining it

@5:30 why paste new instead of just paste? doesn't that make the new components unique?

Can I use the 3D SpaceMouse as a regular 2D mouse (left and right click + drag a drop windows and so on? I have mobility problems so dragging a regular mouse gets a little complicated. Use the 3d SpaceMouse as a joystick pointer with the same functions a regular mouse would be great.

This doesn’t help at all

יאאווו ישראלים

Just so you you know. You left out a few things (Autodesk Fusion Personal (Not for Commercial Use)) has limitations. One big one is the the files it can export (dwg, igs, iges, and sat) are no longer allowed for those of us that paid $2500 for the AutoCad program this was a punch in the gut.

Велике дякую за відео)

Excellent , exactly what I needed to learn and without long winded too much tech talk, thank you

I must apologize for not commenting sooner. I've used this video as a reference many times. Thanks for taking the time to introduce me to a number of features. Today's adventure was a square solar peg. The only difference was adding a square to the second sketch to make the top and middle sections.

my man

to get rid of the usb inserted with 12604 error. I had to downgrade the firmware to 4.4.1. while in 4.4.1, turn the firmware update to off and upgrade to newest firmware.

I want my text to be flush. No out or cut. Just text flush to the ring.. Get it

That was a really clever way to create the rack! Definitely the most straight forward and easy to understand explanation I've come across so far. Thanks for taking the time to make these videos :D

word!

Thanks a lot!

cool tutorial, thumbs up

Que buena idea¡¡¡

Thanks for the great tut. Is there a way i can wrap my straight body into circular body or around a cylinder. The goal is to make a flat rectangles with holes on it then i want to wrap it in 360 round shape

There is a fair bit of detail that goes into gear design... And yes your teeth mesh, but their profile are off!

Thank you very much, it was much helpful, than official guide

After 5 years, still helpful!! thanks!

8:44 risking your life for us!

I am brand new to 360 so this was incredible to find so early on. Thank you SO much!

You can do any setup in under a minute when you skip most of the steps. Here’s brain surgery in a second:

I was looking for something like this!!! Does this plugin not affect the operation of Fusion 360 for Personal use? If I install this plugin, and export the SVG to a folder on my PC, then it is possible to use this file to print on tracing paper or stickers? I appreciate your response and thank you for publishing this video.

Why the Fusion 260 cannot make coil with custom shape, with given profile drawn in the sketch?

How you can move several models from the same .stl file? In Cura.

hi, i am new to fusion and trying to replicate your desing, in user parametor the word cell take is reference where; thank you

if anybody is interested in the actual operation, go to 4:40

Just what I was looking for… Making temporary support. Thank you for sharing

You know long I've been trying to cut a very detailed surface into another body. It was so easy with your video. Thank you!

7 years on, this is still the recommended solution.

This saved me today. Thank you!

Nice video.

Thank you soo much!

I had my prusa mini plus for years and just updated the firmware to 6.0.0 without installing all the previous versions. Thanks for showing how to enable input shaping. I can't believe it wasn't enabled by default

that was a great explanation that touched upon many different techniques! Thanks

Your tutorials so straightforward and logical! Much better than videos from "pros"😅